 |
|||
|
|
|||
| ||||||||||
|
|  MIL-H-85478A(AS)
PACKAGING
5.
Packaging shall be level A or
Packaging.
5.1
minimum protection, as specified (see 6.2f),
Level A. Each beaded handle shall be placed
5.1.1
into a clear polyethylene bag along with an identification label.
Minimum protection. The beaded handle of one
5.1.2
type shall be packaged to afford the minimum degree of protection
necessary to prevent damage during shipment under normal environ-
mental conditions and commercial modes of transportation.
Packing. Packing shall be level A or minimum
5.2
protection as specified (see 6.2f).
Level A. Fifty beaded handles, packaged as
5.2.1
specified in 5.1, shall be packed in a fiberboard shipping
container. except that the fiberboard container shall be
weather-resistant class, variety SW, grade V3C and V3S. In
addition, each container shall be reinforced with flat steel
strapping or tape banding in accordance with the appendix to
PPP-B-636.
Minimum protection. The packaged beaded handles
5.2,2
shall be packed in a manner that will insure safe transportation at
the lowest rate to the point of delivery, Containers shall conform
to the minimum requirements of the rules and regulations applicable
to the mode of transportation selected.
Marking. Unit and shipping containers shall be
5.3
marked in accordance with the requirements of MIL-STD-129.
NOTES
6.
Intended use. Beaded handles together with the
6.1
appropriate inflation device are intended for use as emergency and
life support equipment by personnel forced down at sea.
Acquisition documents
Acquisition requirements.
6.2
shall specify the following:
Title, number, type and date of this speci-
a.
fication.
b.
Government part number.
c.
Quantity desired.
d.
Whether first article inspection is waived
(See 4.3.1).
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals