17 March 1992
30 October 1968
INITIATOR, CARTRIDGE ACTUATED, DELAY, M32A1 ASSEMBLY
This specification is approved for use by all Departments and Agencies of the Department of
1.1 Scope. Thisspecification coversthe requirements for the M32A1 Delay Cartridge Actuated
Initiator Assembly (see 6.1).
2. APPLICABLE DOCUMENTS
2.1 Government documents.
2.1.1 Specifications and standards. The following specifications and standards form a part
of this document to the extent specified herein. Unless otherwise specified, the issues of these
documents are those listed in the issue of the Department of Defense Index of Specifications and
Standards (DODISS) and supplements thereto, cited in the solicitation (see 6.2).
Ammunition, General Specification For
Initiator, Cartridge Actuated, Delay, M30A1, M32A1, M92, M43A1, and M120
Remanufactured Metal Parts Assembly
Initiator, Cartridge Actuated, M30A1, M32A1, M43A1, M92, and M120 Metal
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in
improving this document should be addressed to: Commander, Indian Head Division, Naval Surface Warfare
Center, Standardization Branch (Code 3730), 101 Strauss Avenue, Indian Head, MD 20640-5035, by using the
Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by
sending a letter.
DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited.