 |
|||
|
Page Title:
Table II. Conditioning temperature. |
|
||
| ||||||||||
|
|  MIL-I-60513A
203 Contents of box exposed Visual
204 Box damaged Visual
205 Marking missing, incorrect, or illegible
Visual
206 Number of units incorrect Visual
4.2.2.8 Box, Fiberboard (Outer), Alternative, Ammunition, Packing, Drawing 9216824.
Critical
None defined
Major
None defined
Minor
201 Contents loose Manual/visual
202 Box broken or damaged Visual
203 Number of units contained incorrect
Visual
204 Marking missing, incorrect, or illegible
Visual
205 Tape incomplete
Visual
4.2.3 Inspection testing. The following tests shall be performed in accordance with 4.3.
4.2.3.1 Initiator pin security. The initiator pin of each subassembly shall be subjected to
the initiator pin security test. Failure of any unit to comply with the requirement of 3.4 shall
be cause for rejection of the subassembly.
4.2.3.2 Breakaway torque. Each chamber and cap assembly shall be subjected to the breakaway
torque test. Failure of any assembly to comply with 3.5 shall be cause for rejection of the
assembly.
4.2.3.3 Residual magnetism. Each initiator shall be subjected to the test for excessive
residual magnetism as specified in 4.3.3. Failure of any initiator to comply with 3.6 shall be
cause for rejection of the initiator.
4.2.3.4 Functional tests. The following tests shall be performed by the Government.
4.2.3.4.1 Ballistics. Twenty-one units from each lot shall be tested to determine compliance
with 3.8. The units shall be temperature conditioned as provided in table II. Failure of any unit
to comply with 3.8 shall be cause for rejection of the lot.
TABLE II. Conditioning temperature.
Temperature ( F)
Sample Size
60 to 70
7
65 to 75
7
8
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals