 |
|||
|
Page Title:
Table II. Classification of defects. |
|
||
| ||||||||||
|
|  MIL-K-70493(AR)
4.3
Inspection
provisions.
4.3.1 Submission of product. Unless otherwise specified by
the contracting officer, inspection lot size, lot formation, and
presentation of lots shall be in accordance with "Submission of
Product" provision of MIL-STD-105.
4.3.2
Examination
and
tests.
4.3.2.1 Components and subassemblies. All components and
subassemblies shall be inspected in accordance with the inspection
provisions contained in Quality Assurance Provisions (QAP's)
listed in the Technical Data Package (TDP). In the absence of
QAP's, the applicable Quality Assurance Provisions of MIL-F-13926
shall apply.
4.4
Samplinq.
4.4.1 Environmental/performance. The keyboard
shall
be
inspected to the requirements in Table II.
Classification of defects.
TABLE II.
Test Procedure
Requirement
Characteristics
No.
100% Inspection
4.6.3
3.2.1.1
Key closure
1.
4.6.4
3.2.1.2
LED illumination
2.
4.6.5
3.2.1.3
ELB illumination
3.
4.6.1
3.3.2
ESS temperature
4.
4.6.2
3.3.3
ESS vibration
5.
AQL 1.0% Defective
MAJOR:
4.6.6
3.6
Workmanship
101.
4.4.2 Special sampling.
One display\processor circuit board.
random as a special sample from each.
assembly shall be selected at
ever occurs first. The sample
lot or each 100 produced which
Shall meet the requirements
and tests in Table III.
Classification of defects.
TABLE III.
Test Procedure
Requirement
Characteristics
No.
Applicable
Drawing\Visual
3.4
Fabrication
201.
Applicable
Drawing\Visual
3.7
Materials
202.
The tests in Table III shall be conducted at room anbient
NOTE:
temperature (as specified in 3.3.1).
7
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals