 |
|||
|
Page Title:
Table IV. End item visual defect for governor assembly and govenor wear gage |
|
||
| ||||||||||
|
|  MIL-L-43693A(GL)
and the AQL, expressed in terms of defects per hurdred units, shall be 0.25 for
major defects and 10 for total (major and minor combined) defects.
TABLE IV. End item visual defect for governor assembly and govenor
wear gage
Classification
Examine
Major Minor
Defect
Cut, tear, hole, abrasion, or
Webbing
101
weak area
102
Not specified type or class
201
Ends not seared
202
Color not as specified
Thread
Type, class, or size not as
103
specified
203
Color not as specified
Cord (lanyard)
204
Not type specified
Core not removed, knots, insecure,
205
free ends not seared
Metal components
Fractured, malformed, bent, or
(snap hook, gage,
104
otherwise damaged
or governot, as
Snap hook attached with open side
applicable)
facing in wrong direction in re-
206
lation to the governor rope clip
105
Burrs, slivers, or sharp edges
Finish not as specified or
106
corroded area
Dip brazing not as specified, i.e.,
incomplete penetration of filler
metal into joints; porosity or
107
flux inclusions
Any functional surface with surface
roughness in excess of maximum
108
specified on drawing
Rough surface on or around brazing
fillets caused by dripping of dip
109
brazing metal
Any filler metal on exterior or
110
rung in excess of required fillet
Excessive flow of filler metal into
207
frame of governor
111
Stitching pattern not as specified
Stitches and
112
stitching
Any row ofstitching missing
9
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals