 |
|||
|
|
|||
| ||||||||||
|
|  MIL-L-45963
4.5.2.2.1 Parts and assemblies. Parts and assemblies shall be
visually and manually examined to determine compliance with the mater-
ials, construction and design requirements of 3.2 and the applicable
requirements of 3.2.1 through 3.2.11. Parts and assemblies failing
to meet the requirements shall be rejected.
4.5.2.2.2 Visually examine all marking required by the final
assembly drawing to assure they are clear and eligible.
4.5.2.2.3 Visually examine the identification plate for compliance
with the applicable drawing, for secure assembly (see 3.5)$ serialization
and to assure that all pertinent data has been applied.
4.5.3 Testing.
4.5.3.1 Failure data. Unless otherwise specified herein, all tests
shall be conducted on a complete Loader. If test requirements cited
herein are not met, acceptance of the Loader shall be deferred and the
contractor shall accomplish as applicable, the following actions:
Conduct a failure analysis study performing a dimensional
a.
physical. and visual examination of the components which
are suspected to be the cause of failure or malfunction.
Evaluate and correct the applicable production processes
b.
and procedures to prevent recurrence of the same defect(s)
in future production,
c.
Examine Loaders partially assembled Loaders and components
(including components and subassemblies at in-process or
final assembly) to insure that material containing the same
defect is purged from the inventory and not presented to
the Government for acceptance.
d.
Submit the results of the failure analysis and the
corrective actions taken to the Government for review
and approval prior to submitting a reconditioned lot or
reconditioned Loader for retest.
4.5.3.2 Function testing. Each Loader shall be tested for
functioning (see 3.3.1 by using the test method specified in 4.6.1.
Failure of the loader to meet the requirements shall be cause for re-
jection.
4.5.3.2.1 Torque adapter testing. Each loader shall be tested
for torque adapter requirements (see 3.3.1.1) by using the test method
specified in 4.6.1.1. Failure of the loader to meet the requirements
shall be cause for rejection.
6
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals