 |
|||
|
|
|||
| ||||||||||
|
|  MIL-L-48407B(MU)
TABLE II
TEST PROCEDURE
REQUIREMENT
CHARACTERISTIC
4.6.4.1.1
3.3.4.1.1
401.
Operating temperature
4.6.4.2.1
3.3.4:2.1
Storage temperature
402.
4.6.4.2.2
Vibration "A" (W /O carrying
3.3.4.2.2
403.
case)
4.6.4.2.3
3.3.4.2.3
Vibration "B"(w/carrying
404.
case)
4.3.3 Sontrol tests. - Three trainer assemblies shall be selected
and meet the requirements and tests of Table III. These tests shall be
conducted as follow-up tests to the first article samples at 25%, 50%
and 75% points of completion of the production contract. One trainer
shall be subjected to fungus (4.6.4.2.11) humidity non-operating (4.6.4.2.8)
and salt fog (4.6.4.2.9). The remaining two trainers shall be subjected to
all other tests In Table III.
TABLE III
TEST PROCEDURE
REQUIREMENT
CHARACTERISTIC
4.6.1.2
3.3.1
Interchangeability
405.
4.6.3
3.3.3
Electromagnetic
406.
interference
4.6.4.1.2
3.3.401.2
Humidity - operating
407 l
4.6.4.1.3
3*3*4.1.3
Altitude - operating
408.
4.6.4.2.4
3.3.4.2.4
Shock
409.
4.6.4.2.5
3.3.4.2.5
Altitude - non-operating
410.
4.6.4.2.6
3.3.4.2.6
Sunshine
411.
4.6.4.2.7
3.3.4.2.7
Rain
412.
4.6.4.2.8
3.3.4.2.8
Humidity - non-operating
413.
4.6.4.2.9
3.3.4.2.9
Salt fog
414.
4.6.4.2.10
3.3.4.2.10
Dust
415*
4.6.4.2.11
3.3.4.2.11
Fungus
416.
4.3.4 General. - One assembly shall be selected at random as a
special sampling from each 100 produced. The sample shall meet the
requirements and tests in Table IV.
TABLE IV
TEST PROCEDURE
REQUIREMENT
CHARACTERISTIC
Applicable Drawing-
3.1
Fabrication
417.
Visual
MIL-F-13926, MIL-O-
3.2
General specifications
418.
13830 - visual
NOTE: These tests shall be conducted at a temperature between 60
and 90F.
9
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals