 |
|||
|
Page Title:
First article inspection report |
|
||
| ||||||||||
|
|  d.
Furnish a schedule of maintenance to be followed
during all testing of the loader. Provide a
list of special tools required to perform this
maintenance.
First article sample. Unless otherwise specified, as
4.4.2
soon as practicable after the award of the contract or order, the manu-
facturer shall submit one loader for inspection to determine conformance
with this specification (see 6.6.2) and DL 1378AS100. This unit shall be
representative of the construction, workmanship, components, and materials
.
When a manufacturer is in continuous
to be used during production.
production of these units from contract to contract, submission of a
first article sample on the new contract may be waived at the discretion
of the Government (see 6,3.1). Approval of the first article sample, or
the waiving of the first article inspection is not a waiver of the
requirement of submitting to the quality conformance inspection. Upon
completion of the first article inspection, all of the applicable inspection
and test reports, and when applicable recommendations and comments
pertinent for use in monitoring production shall be forwarded to the
cognizant Government activity (see 6.2). The approved unit shall be
returned to the manufacturer for use in monitoring production. It shall
be refurbished and delivered as the last unit under the contract.
First article inspection report. A first article
4.4.3
inspection report shall be prepared in accordance with MIL-STD-831 (see
6.2.2).
4.5
Quality conformance inspection. The loader shall be
subjected to the tests marked "X" listed in the quality conformance test
column of table I. Failure of any test shall be cause for rejection.
After successful completion of all the quality conformance tests, the
loader shall be examined for the defects marked "X" listed in the quality
conformance test column of table II. Presence of one or more defects
shall be cause for rejection.
4.5.1
Quality conformance inspection report. A quality
conformance inspection report shall be prepared in accordance with MIL-
STD-831 (see 6.2.2).
Inspection comparison. The Government may select
4.6
the loaders at any time during the contract production period and subject
the loaders to the examination specified in 4.5 and the first article
test column of table II and to tests specified in 4.5 and in the first
article test column of table I to determine conformance to the require-
ments of this specification. The inspection will be performed by the
the
at random, from those which have been
Government but will not include the previously inspected first produced
loader. In addition to any test specified as part of the inspection
comparisons the Government reserves the right to conduct any and all
other tests contained in this specification as part of the inspection
comparison, and failure to such additional tests shall have the same
effect as failure of those tests specified as inspection comparison.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals