 |
|||
|
Page Title:
Microcircuits, Linear, Monolithic and Hybrid Silicon, Microprocessor Compatible, 12 Bit Analog-to-Digital Converters |
|
||
| ||||||||||
|
|  INCH-POUND
MIL-M-38510/140A
22 December 2004
SUPERSEDING
MIL-M-38510/140
31 October 1986
MILITARY SPECIFICATION
MICROCIRCUITS, LINEAR, MONOLITHIC AND HYBRID SILICON,
MICROPROCESSOR COMPATIBLE, 12 BIT ANALOG-TO-DIGITAL CONVERTERS
Reactivated after 22 December 2004 and may be used for either new or existing design acquisitions.
This specification is approved for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the product herein shall consist of this specification sheet and
MIL-PRF-38535 and MIL-PRF-38534.
1. SCOPE
1.1 Scope. This specification covers the detail requirements for monolithic and hybrid, microprocessor
compatible, 12-bit successive approximation analog-to-digital converters buffered outputs. Two product assurance
classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number.
For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).
1.2 Part or identifying number (PIN). The PIN is in accordance with MIL-PRF-38535, and as specified herein.
1.2.1 Device types. The device types are internally compensated and are as follows:
Device
Input voltage range
Technology
Bipolar zero
Gain error drift
type
(all device types)
drift
(ĆAE / ĆT)
(ĆBZ / ĆT)
(pin programmable)
LSB limits
ppm/C limits
Min
Max
Min
Max
01
0 V to +10 V unipolar
Monolithic
-1
+1
-12.5
+12.5
0 V to +20 V unipolar
-5 V to +5 V bipolar
-10 V to +10 V bipolar
02
Same as defined for device type 01
Monolithic
-2
+2
-25
+25
03
"
Hybrid 1/
-1
+1
-12.5
+12.5
04
"
Hybrid 1/
-2
+2
-25
+25
05
"
Monolithic
-1
+1
-12.5
+12.5
06
"
Monolithic
-2
+2
-25
+25
1.2.2 Device class. The device class is the product assurance level as defined in MIL-PRF-38535.
1.2.3 Case outline. The case outlines are as designated in MIL-STD-1835 and as follows:
Outline letter
Descriptive designator
Terminals
Package style
X
GDIP1-T28 or CDIP2-T28
28
Dual-in-line
1/ The 03 and 04 devices shall have to meet the hybrid requirements of MIL-PRF-38534.
Comments, suggestions, or questions on this document should be addressed to: Commander, Defense
Supply Center Columbus, ATTN: DSCC-VAS, 3990 East Broad St., Columbus, OH 43218-3990, or emailed
to linear@dscc.dla.mil. Since contact information can change, you may want to verify the currency of this
AMSC N/A
FSC 5962
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals