 |
|||
|
Page Title:
Recommended operating conditions. |
|
||
| ||||||||||
|
|  MIL-M-38510/15B
1.3 Absolute maximum ratings.
Supply voltage range ......................................................
-0.5 V dc to +7.0 V dc
Input voltage range .........................................................
-1.5 V dc at -12 mA to +5.5 V dc
Storage temperature range ............................................
-65C to +150C
Maximum power dissipation per gate, (PD) 1/
Device types 01 and 02 ...........................................
280 mW dc
Device type 03 ........................................................
630 mW dc
Device type 04 ........................................................
325 mW dc
Lead temperature (soldering 10 seconds) ......................
300C
Thermal resistance, junction-to-case (θJC)......................
(See MIL-STD-1835)
175C
Junction temperature (TJ ) 2/ ..........................................
1.4 Recommended operating conditions.
Supply voltage ................................................................
4.5 V dc minimum to 5.5 V dc maximum
Minimum high level input voltage ...................................
2.0 V dc
Maximum low level input voltage ....................................
0.8 V dc
Normalized fanout (each output) 3/ ................................
5 maximum
-55C to 125C
Case operating temperature range (TC ) .........................
Setup time, t(SETUP) data to output
Types 01 and 02 .....................................................
25 ns minimum
Setup time t(SETUP), type 03
Data to enable (high) ...............................................
10 ns minimum
Data to enable (low) ................................................
16 ns minimum
Setup time t(SETUP), type 04
Data to enable (high) ...............................................
5 ns minimum
Data to enable (low) ................................................
25 ns minimum
Setup time, t(SETUP) data to set (high)
Type 04 ...................................................................
8 ns minimum
Input hold time t(HOLD), types 01 and 02
Clock to data ...........................................................
5 ns minimum
Data to clock ...........................................................
30 ns minimum
Input hold time t(HOLD), type 03
Data to enable (high)................................................
0 ns maximum
Data to enable (low) ................................................
4 ns maximum
Input hold time t(HOLD), type 04
Data to enable (high)................................................
0 ns maximum
Data to enable (low) ................................................
7 ns maximum
Input hold time t(HOLD), type 04
Data to set (low) ......................................................
8 ns maximum
2.0 APPLICABLE DOCUMENT
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this specification.
This section does not include documents cited in other sections of this specification or recommended for
additional information or as examples. While every effort has been made to ensure the completeness of this
list, document users are cautioned that they must meet all specified requirements of documents cited in
sections 3, 4, or 5 of this specification, whether or not they are listed.
_______
1/ Must withstand the added PD due to short circuit condition (e.g. IOS) at one output for 5 seconds duration.
2/ Maximum junction temperature should not be exceeded except in accordance with allowable short
duration burn-in screening condition in accordance with MIL-PRF-38535.
3/ Device will fanout in both high and low levels to the specified number of inputs of the same device type
as that being tested.
2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals