 |
|||
|
Page Title:
Recommended operating conditions. |
|
||
| ||||||||||
|
|  MIL-M-38510/161A
1.3 Absolute maximum ratings.
Supply voltage range ....................................................................
-0.5 V dc to +7.0 V dc
Input voltage range .......................................................................
-1.5 V dc at -12 mA to +5.5 V dc
-65C to +150C
Storage temperature range ..........................................................
Maximum power dissipation (PD) .................................................
210 mW dc 2/
+300C
Lead temperature (soldering, 10 seconds) ...................................
Thermal resistance, junction to case (θJC):
Cases A, B, C, D ........................................................................
See MIL-STD-1835
+175C
Junction temperature (TJ) ............................................................
1.4 Recommended operating conditions.
Supply voltage (VCC) ................................................................... 4.5 V dc minimum to 5.5 V dc maximum
Minimum high level input voltage (VIH) ........................................ 2.0 V dc
Maximum low level input voltage (VIL) .........................................
0.8 V dc
Normalized fanout (each output) :
High level voltage .....................................................................
20
Low level voltage ......................................................................
10
-55C to +125C
Ambient operating temperature range ..........................................
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this specification. This
section does not include documents cited in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list, document users
are cautioned that they must meet all specified requirements of documents cited in sections 3, 4, or 5 of this
specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications and Standards. The following specifications and standards form a part of this specification to the
extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or
contract.
DEPARTMENT OF DEFENSE SPECIFICATION
MIL-PRF-38535 -
Integrated Circuits (Microcircuits) Manufacturing, General Specification for.
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-883
-
Test Method Standard for Microelectronics.
MIL-STD-1835
-
Interface Standard Electronic Component Case Outlines
(Copies of these documents are available online at http://assist.daps.dla.mil/quicksearch/ or
http://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D,
Philadelphia, PA 19111-5094.)
2.3 Order of precedence. In the event of a conflict between the text of this specification and the references cited
herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws and
regulations unless a specific exemption has been obtained.
_______
2/ Must withstand the added PD due to short-circuit conditions (e.g., IOS) at one output for 5 seconds.
2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals