15 September 2003
10 December 1982
MICROCIRCUITS, DIGITAL, BIPOLAR, LOW-POWER SCHOTTKY TTL,
COUNTERS, MONOLITHIC SILICON
Inactive for new design after 18 April 1997.
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
1.1 Scope. This specification covers the detail requirements for monolithic silicon, low-power Schottky TTL,
binary and decade counters microcircuits. Two product assurance classes and a choice of case outlines and lead
finishes are provided for each type and are reflected in the complete part number. For this product, the requirements
of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).
1.2 Part number. The part number should be in accordance with MIL-PRF-38535, and as specified herein.
1.2.1 Device types. The device types should be as follows:
Dual decade counter with A and B inputs
Dual 4 bit binary counter
Dual decade counter with clear and set-to-nine
1.2.2 Device class. The device class should be the product assurance level as defined in MIL-PRF-38535.
1.2.3 Case outlines. The case outlines should be as designated in MIL-STD-1835 and as follows:
GDFP5-F14 or CDFP6-F14
GDIP1-T14 or CDIP2-T14
GDFP1-F14 or CDFP2-F14
GDIP1-T16 or CDIP2-T16
GDFP2-F16 or CDFP3-F16
Square leadless chip carrier
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in
improving this document should be addressed to: Commander, Defense Supply Center Columbus, ATTN:
DSCC-VAS, P. O. Box 3990, Columbus, OH 43216-5000, by using the self addressed Standardization
Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter.
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.