16 June 2004 __
7 August 1987
MICROCIRCUITS, DIGITAL, BIPOLAR ADVANCED SCHOTTKY TTL,
NAND BUFFERS, MONOLITHIC SILICON
Reactivated after 16 June 2004 and may be used for either new or existing design acquisition.
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
The requirements for acquiring the product herein shall consist of this specification sheet and MIL-PRF 38535
1.1 Scope. This specification covers the detail requirements for monolithic silicon, Advanced Schottky TTL,
NAND buffers. Two product assurance classes and a choice of case outlines and lead finishes are provided for each
type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been
superseded by MIL-PRF-38535, (see 6.3).
1.2 Part or Identifying Number (PIN). The PIN is in accordance with MIL-PRF-38535, and as specified herein.
1.2.1 Device types. The device types are as follows:
Quad 2-input NAND buffer
Quad 2-input NAND buffer (open collector)
Dual 4-input NAND buffer
1.2.2 Device class. The device class is the product assurance level as defined in MIL-PRF-38535.
1.2.3 Case outlines. The case outlines are as designated in MIL-STD-1835 and as follows:
GDIP1-T14 or CDIP2-T14
GDFP1-F14 or CDFP2-F14
Square leadless chip carrier
Comments, suggestions, or questions on this document should be addressed to: Commander, Defense
Supply Center Columbus, ATTN: DSCC-VAS, P. O. Box 3990, Columbus, OH 43218-3990, or emailed to
email@example.com. Since contact information can change, you may want to verify the currency of this
address information using the ASSIST Online database at www.dodssp.daps.mil.