 |
|||
|
|
|||
| ||||||||||
|
|  MIL-M-38510/653B
1.4 Recommended operating conditions Continued.
Device type 52:
Maximum input low voltage (VIL) ...........................................................
0.8 V at VCC = 4.5 V to 5.5 V
Minimum input high voltage (VIH) ...........................................................
2.0 V at VCC = 4.5 V to 5.5 V
Supply voltage range (VCC) ....................................................................
4.5 V dc to 5.5 V dc
Output voltage range (VOUT) ...................................................................
0.0 V dc to VCC
-55C to +125C
Operating ambient temperature range (TA) ...........................................
Width of clock pulse (tp clock) .................................................................
30 ns minimum
Width of clear pulse (tp clear) .................................................................
30 ns minimum
Width of preset pulse (tp preset) ..............................................................
30 ns minimum
Data setup time before clock (tsetup) ........................................................
30 ns minimum
trem setup time before clock (tsu clear or tsu preset) .................................
38 ns minimum
Hold time (thold) ........................................................................................
3 ns minimum
Input rise and fall times (tr, tf):
VCC = 4.5 V ............................................................................................
500 ns maximum
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this specification. This
section does not include documents cited in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list, document
users are cautioned that they must meet all specified requirements of documents cited in sections 3, 4, or 5 of this
specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications and Standards. The following specifications and standards form a part of this specification to
the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the
solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATION
MIL-PRF-38535 -
Integrated Circuits (Microcircuits) Manufacturing, General Specification for.
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-883
-
Test Method Standard Microcircuits.
MIL-STD-1835
-
Interface Standard Electronic Component Case Outlines.
(Copies of these documents are available online at http://assist.daps.dla.mil/quicksearch or
http://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D,
Philadelphia, PA 19111-5094.)
2.3 Order of precedence. In the event of a conflict between the text of this document and the references cited
herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws
and regulations unless a specific exemption has been obtained.
3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals