17 AUGUST 2005
5 NOVEMBER 1987
MICROCIRCUITS, DIGITAL, BIPOLAR, SCHOTTKY TTL,
DATA SELECTORS / MULTIPLEXERS WITH THREE-STATE OUTPUTS, MONOLITHIC SILICON
Inactive for new design after 23 August 1996.
This specification is approved for use by all Depart-
ments and Agencies of the Department of Defense.
The requirements for acquiring the product herein shall consist of this specification sheet and MIL-PRF 38535.
1.1 Scope. This specification covers the detail requirements for monolithic silicon, Schottky TTL, data selectors /
multiplexers (three-state) microcircuits. Two product assurance classes and a choice of case outlines and lead
finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-
38510 have been superseded by MIL-PRF-38535, (see 6.4).
1.2 Part or Identifying Number (PIN). The PIN is in accordance with MIL-PRF-38535, and as specified herein.
1.2.1 Device type. The device type is as follows:
8 input, data selector / multiplexer
Dual, 4-input, data selector / mutiplexer
Quad, 2-input, data selector / multiplexer
Quad, 2-input, data selector / multiplexer with inverted output
8-input, data selector / mutiplexer with 3-state outputs
Quad, 2-input, data selector / multiplexer with 3-state outputs
Quad, 2-input, data selector / multiplexer with 3-state
Dual, 4-input, data selector / multiplexer with 3-state outputs
1.2.2 Device class. The device class is the product assurance level as defined in MIL-PRF-38535.
1.2.3 Case outlines. The case outlines are as designated in MIL-STD-1835 and as follows:
Dual in line package
Square chip carrier package
Comments, suggestions, or questions on this document should be addressed to: Commander, Defense
Supply Center Columbus, ATTN: DSCC-VAS, P. O. Box 3990, Columbus, OH 43218-3990, or emailed to
email@example.com. Since contact information can change, you may want to verify the currency of this
address information using the ASSIST Online database at http://assist.daps.dla.mil.