Click here to make tpub.com your Home Page

Page Title: Bipod assembly (7793009).
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 




img
MIL-M-45013E (AR)
shall bepermitted provided they do not cause marks on the case
of a M60 High Pressure Test Cartridge (MIL-C-46477) fired in the
chamber. The barrel assembly shall be proof and magnetic
particle inspection marked in accordance with dwg 7269028.
Tube assembly (7269042). The tube assembly shall be
a.
proof, magnetic particle inspection and manufacturing
identification marked in accordance with dwg 7269042.
Gas cylinder (7269036). The gas cylinder shall be
b.
fastened securely on the tube assembly (7269042) by the
gas cylinder rivets (7269039) so that there shall be no
relative movement. With the barrel assembly with bipod
assembly (7269027) disassembled from the receiver
assembly (11686308), the gas piston (7791247) shall move
of its own weight through its full range of travel in the
gas cylinder.
Front sight (7269040). The front sight shall be fastened
c.
securely on the tube assembly (7269042) by the front
sight rivets (7269038) so that there shall be no relative
movement.
Socket (7269041). The socket shall be assembled to the --
d.
tube assembly to meet headspace requirements, and torqued
to the requirement of dwg 7269028. The socket shall be
locked in position a a key (7269037) which is staked in
two places. The manufacturer's material and heat
treatment lot numbering shall be visible on the socket.
3.3.1.2 Bipod assembly (7793009). The biped assembly shall
be retained on the barrel assembly (7269028) by the flash
suppressor (7269034) and when assembled shall be capable, by its
own weight, of rotating on the tube assembly (7269042) between
its stop positions. The leg assemblies (7269046 and 7269047)
shall lock in place in the open or folded positions and shall be
capable of being manually released from each position by a pull
action within the load limits specified on dwg. 7793009. The
foot assemblies (7269055 and 7269061) shall be capable of being
manually released from each position by a pull action within the
load limits specified on drawings 7269046 and 7269047
respectively and shall lock under spring action of the retainer
spring (7269059) in any of the five locking positions. The foot
assemblies shall not retract from any locked position unless the
retainer springs are manually depressed.
5

Privacy Statement - Press Release - Copyright Information. - Contact Us