Disposition of tested machine guns (see 18.104.22.168).
Packaging instructions for repair parts (see 5.3).
List of Special Inspection Equipment to be furnished the
contractor (see 4.4.4.l and 22.214.171.124) and responsibilities
for other Government property to be furnished the
Responsibility for furnishing ammunition, links, and
bandoleer (see 126.96.36.199).
Responsibility for test firing facilities and operating
procedures (see 6.5).
Shipping instructions for machine guns when an interplant
interchangeability test is required (see 188.8.131.52.2).
Procedures and methods for demilitarizing and disposing
of rejected material.
Disposition of Government furnished property.
Requirement to conduct reliability test.
Requirements for reporting failure analysis (see 4.4.3)
and 6.2 paragraphs) on failures to meet specification
requirements during testing.
Bar code marking requirements.
Contract data requirements for inspection equipment
designs (conforming to Data Item Description DI-DRPR-
Reporting requirements for failure analysis (conforming
to-Data Item Description DI-R-21598 Tailored).
6.3 Inspection equipment designs Inspection requipment
designs are of two types - Government Special Inspection Equip-
ment (SIE) designs and contractor designs. SIE designs are
designated by drawing numbers under the "Methods of Inspection"
heading in Section 4. Design responsibility for all other
inspection equipment is assigned to the contractor. However, the
contractor need-not furnish any design when a complete Government
SIE is part of the Technical Data Package (TDp). Unless
otherwise specified, the contractor may submit alternate or
modified contractor designs of SIE in accordance with 6.3.2 and
6.3.3 should he elect to do so.