contracting officer, inspection lot size, lot formation and presentation
of lots shall be in accordance with "Submission of Product" provisions
4.3.2 Examination and tests.
184.108.40.206 Components and subassemblies.- All components and sub-
assemblies shall be inspected in accordance with the inspection provisions
contained in Supplementary Quality Assurance Provisions (SQAP) listed in
the technical data package (TDP). In the absence of SQAPs, the applicable
Quality Assurance Provisions of MIL-F-13926 shall apply. Examination and
tests related to Section 3 herein shall be performed on a single defect
(individual characteristic) basis in accordance with MIL-STD-105 and the
sampling plans specified in Tables I, II and III herein. Examination and
tests for packaging, packing and marking shall be in accordance with
MIL-P-14232 and Section 5 herein. The tabulated classification of defects
in Tables I, II and III shall constitute the minimum inspection to be
performed by the supplier after first article approval and prior to
Government acceptance or rejection by item or lot.
TABLE - CLASSIFICATION OF DEFECTS
4.3.3 Acceptance and rejection.- Rejected lots shall be screened
for all defective characteristics. Removal or correction of defective
units and resubmittance of rejected lots shall be in accordance with
"Acceptance and Rejection" as specified in MIL-STD-105.
4.4 Special sampling.
4.4.1 General. One mount shall be selected at random by a govern-
ment representative as a special sample from each 100 produced, or from
each months production, whichever occurs first. The sample shall have