22.214.171.124 Componentparts and concurrent repair parts.
Examination of parts shall be performed in accordance with the
criteria specified in the contract (see 6.2). The contractor's
examination of parts shall be accomplished prior to their
assembly into the end item or submission for acceptance as repair
126.96.36.199 Machine suns. Final examination of machine guns
shall be performed after completion of all testing and just prior
to preservation and packaging. Each machine gun shall be
examined as specified below. Unless otherwise specified all
requirements for examination are classified as Major. Each step
in the examination shall include a visual examination for proper
cleaning and presence of the specified protective coating.
Machine guns failing to meet the requirements shall be rejected.
188.8.131.52.1 Visual and manual examination. Visually examine
machine gun for cleanliness workmanship, and completeness of
manufacturing, assembly finish, and marking (identification, bar
code marking, proof firing, and magnetic particle inspection) .
Manually examine the machine gun for functioning of operating
parts and visually examine markings for clarity and legibility.
(see 3.2 through 184.108.40.206, 3.4, 3.5 and 3.6).
Disassemble spade grip back plate assembly from the
receiver examining for ready disassembly (see 3.3.6) .
Visually and manually
Visually and manually examine the knob and pin assembly
to determine compliance with 220.127.116.11.
Manually examine retention, free movement, and spring
action of knob lock pin to determine compliance with
Visually and manually examine the machine gun grips to
determine compliance with 18.104.22.168.
Visually and manually examine trigger and frame assembly
to determine compliance with 22.214.171.124.
Visually and manually examine the sear link rod and the
sear link connector to determine compliance with