Visually examine to assure that ejector face is flush
with or below front of bolt (See 11010357)
Manually examine cam actuator assembly for compliance
Manually examine retention and spring action of ejector
for compliance with 126.96.36.199.
Manually examine spring
pliance with 188.8.131.52
Disassembly of bolt assembly
Disassemble all parts except ejector from bolt assembly
Visually and manually examine all parts for mutilations,
breaks, or cracks.
c. Visually and manually examine bolt luds, operating cam
cut rollers, guideways, cam actuator assembly, extractor
lips, and ejector face cracks burrs, sharp edges,
Visually examine firing pin striker point it shall be
smooth and free of pits and burrs. Examine filletradii
at spools for cracks and deformation
Reassemble bolt assembly, assuring that cam actuator
assembly is properly assembled with roller end forward on
bolt and that extractor is securely retained by the
plunger and spring.
Sear and safety housing assembly
Disassemble the sear and safety housing assembly
examining to detrmine compliance with 3.3.14
Manually examine safety for movement between the safe and
fire positions to determine compliance with 184.108.40.206.
Manually examine free movement of sear under
action to determine compliance with 220.127.116.11.