 |
|||
|
|
|||
| ||||||||||
|
|  MIL-M-45945A
Classification of characteristics for packaging
4.4.2.3.1
characteristic
Category
None defined.
Critical:
Major:
Marking is legible and correct
101.
Correct location of marking
102.
Proper level of packaging and packing
103.
(See procurement documents)
Adequate cleaning and drying
104.
Proper preservative application and drainage
105.
proper closure of interior packages
106.
proper closure and strapping of shipping containers
107.
All items of equipment present
108.
position of assemblies
Proper assembly of package:
109.
in supports, position of separator between supports
and assembly of cells
Minor:
Workmanship
201.
4.4.2.3.2
Repair parts Examination of packaging of repair
parts shall
be performed in accordance with the criteria
specified in
the contract (see 6.2).
Testinq
4.4.3
4.4.3.1 Headspace testing. The contractor shall test eacl
machine gun for headspace using the test method specified in
The machine gun failing to meet the requirements shall
4.5.1.
rejected and a failure analysis (see 6.2) performed by the
contractor.
trigqer pull testing the
Firing pin indent and
4.4.3.2
contractor shall test a sample of ten
machine guns selected by
the Government representative from each
inspection lot for firing
pin indent and trigger pull using the
test methods specified in
4.5.2 and 4.5.3 respectively.
4.4.3.2.1 Firing Pin indent. If any firing pin indent is
not within the requirements (3.4.2), it shall be disregarded and
three more impressions shall be takenThe average depth of the
three indents of each test shall be within requirements. All
firing pin indent impressions shall not be off center more than
25
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals