 |
|||
|
Page Title:
Mechanical properties at high and low temperatures. |
|
||
| ||||||||||
|
|  MIL-M-46862B (MI)
TABLE II.
Mechanical properties.
Characteristics
Minimum
Minimum
Average
Individual
Compression strength, ultimate psi x 103
21
18
Compression modulus, psi x 106
2.0
1.8
3.4 Environmental conditions.
3.4.1 Mechanical properties at high and low temperatures. The mechanical
properties shall be as specified in Table III. Requirements shall be met at the
temperature specified after soaking for 30 minutes.
TABLE III. Mechanical properties at high and low temperatures.
Characteristics
Minimum Average
Minimum Individual
at 68.3C
at -53.9C
at 68.3C
at -53.9C
Compressive
strength, ultimate
psi x 103
12
29
9
22
Compression modulus,
psi x 106
1.4
2.0
1.2
1.5
3.5 Workmanship. The workmanship shall be such as to ensure a product
which is uniform and in accordance with this specification. All material shall be free
of dirt, foreign matter, or other contaminates (see 4.7).
4. QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for inspection. Unless otherwise specified in the contract or
purchase order, the contractor is responsible for the performance of all inspection
requirements (examinations and tests) as specified herein. Except as otherwise
specified in the contract or purchase order, the contractor may use his own or any other
facilities suitable for the performance of the inspection requirements specified herein,
unless disapproved by the Government. The Government reserves the right to perform
any of the inspections set forth in this specification where such inspections are deemed
necessary to ensure supplies and services conform to prescribed requirements.
4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals