 |
|||
|
Page Title:
Packaging, packing, and marking. |
|
||
| ||||||||||
|
|  MIL-M48557A(AR)
4.12 Packaging inspection. The preservation, packing,
and
marking shall be inspected to verify conformance to the
requirements of 5.1.
5.
PACKAGING
5.1 Packaging, packing, and marking. Packaging, packing,
and marking shall be in accordance with MIL-P-14232 Packaging
Data Sheet 11727800. The level of protection shall be as
specified in the procurement document.
6.
NOTES
(This section contains information of a general or
explanatory nature that may be helpful, but is not mandatory.)
6.1 Intended use. The mount telescope and quadrant
supports a panoramic telescope, and an elevatio nquadrant. The
purpose of the mount is for precise positioning of the weapon
in azimuth elevation in the indirect fire mode but can also be
used in the direct fire mode.
6.2 Acquisition requirements.
Procurement
data
should
specify the following:
a. Title, number and date of this specification.
b. Selection of an applicable level of preservation,
packaging, and packing.
c. Applicable packaging data sheet number (see 5.1).
d. Applicable stock number.
e. Provisions for First Article Testing.
f. Reliability Assurance Sample.
g. Contract data requirements for submission of
inspection equipment designs conforming to Data Item
Description DI-R-1714 (see 6.3.1).
h. Prospective bidders should be made aware that a
Nuclear Regulatory License is required for the manufacture of
this item.
6.3 Inspection equipment design.
6.3.1 Submission of designs for approval. Contractor
designs for final. acceptance inspection shall be approved by
21.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals