3.4 Performance characteristics.
3.4.1 Absolute maximum ratings. The component absolute maximum
ratings shall be in accordance with values specified in Table I
TABLE I. Maximum Ratings
The component shall be
3.4.2 Operating characteristics.
operable in the conditions specified in Table II of dwg. 9355162.
3.4.3 Electrical performance characteristics. The component
shall meet the electrical performance characteristics specified in
Table III of Dwg. 9355162.
3.4.4 Solderability. External leads must be acid tin
electroplated or solder dipped per MIL-M-38510, paragraph 220.127.116.11
(a) or (b) and if acid tin electroplated, the minimum plating must
be 150 microinches. Parts must also be solderable per MIL-STD-883,
3.5 Screening. All devices shall be 100% screened in full
accordance with MIL-STD-883, method 5004, class B. Final electrical
tests shall include all parameters specified in Tables II and III of
Dwg 9355162. Burn-in circuit shall be as shown in figure 2 herein,