 |
|||
|
|
|||
| ||||||||||
|
|  MIL-M-48647(AR)
Electrical Performance Characteristics
(Cont'd)
TABLE III.
See Section 2(c)(4) of Dwg. 9333602.
3.5.4 Output requirements.
3.6 Solderability. External leads must be acid tin
electroplated or solder dipped per MIL-M-38510, paragraph 3.5.6.2(a)
or (b) and if acid tin electroplated, the minimum plating must be
150 microinches. Parts must also be solderable per MIL-STD-883,
Method 2003.1.
3.7 Screening. All devices shall be 100% screened in full
accordance with MIL-STD-883, Method 5004, Class B. Burn-in circuit
shall be as shown in Figure 6 herein, or equivalent.
3.7.1 Pre-burnin electrical tests. Pre-Burnin Electrical Tests
shall be done in accordance with Section D(1) of Dwg. 9333602.
7
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals