 |
|||
|
|
|||
| ||||||||||
|
|  ..
MIL-M-52329C
/--"
lubricant required for operation. The gear housings shall be tagged
*
. ..
to indicate: "The housing is filled to the operating level with the
applicable-type lubricant." Tags shall conform to UU-T-81, type A.
Tags and the printing thereon shall be waterproofed in accordance with
MIL-STD-129.
s
drive chains shall be coated with
e
to #e inner surfaces of the rollers, pins, and bushings. The excess
preservation than be drained, and the entire chain shall be coated with
type P-1 preservative. Removed chains shall be coiled, and the coil
shall be secured with soft, annealed wire and wrapped with barrier material
conforming to MIL-B-121, type I, grade At class 2, secured with tape
conforming `to PPP-T-60, type I. Sprockets and other unprotected surfaces
of the drives shall be coated with type P-1 preservative.
5.2.1.9.3 Bucket-carry chains. Bucket-carry chains and attached
buckets shall be coated with type P-1 preservative. Removed chains
shall be coiled, and the coil shall be secured with zinc-coated strapping
conforming to QQ-S-781 or QQ-S-790, size w applicable l
-
/--
O
,.
5.2.1.12 Conveyor belts and fasteners. Metal belt fasteners shall be
coated with varnish conforming to MIL-V-1174 or TT-V-l21. The belt
so as not to damage the belt . Unpainted surfaces of the
.
rollers shall be coated with primar Conforming to TT-P-664.
l
59
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals