* Under 3.4, add new paragraphs:
"3.4.1 Material deterioration and control. The item shall be fabricated from
compatible materials, inherently corrosion resistant, or treated to provide
protection against the various forms of corrosion and deterioration that may be
encountered in any of the applicable operation and storage environments to which
the item may be exposed.
3.4.2 Dissimilar metals. Dissimilar metals shall not be used in intimate
contact with each other unless protected against galvanic corrosion. Dissimilar
metals and methods of protection are defined and detailed in MIL-STD-889.
3.4.3 Identification of materials and finishes. The contractor shall
identify the specific material, material finish or treatment for use with
components and subcomponents, and shall make information available upon request
to the contracting officer or designated representative."
* 3.7.1, line 3, delete "Type A color forest green." and substitute "Type F or G
as applicable. Unless otherwise specified (see 6.2) top coat color shall be
camouflage green 383 conforming to MIL-C-46168. The kit shall then be
overcoated in accordance with the Government furnished camouflage patterns with
MIL-C-46168 top coat of the colors specified in the camouflage patterns."
* 3.7.2, line 3, delete "Type A, color white enamel." and substitute "Type F or
G as applicable, color white 17925 in accordance with MIL-C-22750."
3.9.2, line 8, after "used.", add the following new sentences:
"Welds shall not exceed the next 1/16 inch larger size for welds up to 3/8
inch. For welds 3/8 inch and larger the size shall not exceed the next 1/8 inch
larger size. Welds shall not be undersize."
3.10, add new paragraphs:
"3.10 Installation Test.
The installation test shall be conducted in accord-
ance with 184.108.40.206."
"3.11 Operational Test.
The operational test shall be conducted in accord-
ance with 220.127.116.11."
* 3.12 Government-furnished property.
The following property will be furnished
by the Government (see 6.5):