Responsibility for compliance.

Page Title: Responsibility for compliance.
Back | Up | Next

Web
www.tpub.com

Information Categories

....

MIL-M-63995 (AR)

3.7 Data requirements. The contractor shall generate data in

accordance with the requirements of the data item description

cited in 4.6.5.

3.8 Workmanship. Each mount shall be free of defects that

affect overall appearance, serviceability, or performance such as

burrs, fins, sharp edges, and surface flaws or blemishes.

QUALITY ASSURANCE PROVISIONS

4.1 Responsibility for inspection. Unless otherwise

specified in the contract or purchase order, the contractor is

responsible for the performance of all inspection requirements

specified herein. Except as otherwise specified in the contract

or purchase order, the contractor may use his own or any other

facilities suitable for the performance of the inspection

requirements specified herein, unless disapproved by the

Government. The Government reserves the right to perform any of

the inspections set forth in the specification where such

inspections are deemed necessary to assure that supplies and

services conform to prescribed requirements.

4.1.1 Responsibility for compliance. All items must meet the

requirements of Section 3 and 5. The inspection set forth in this

specification shall become a part of the contractor's overall

inspection system or quality proqram. The absence of any

inspection requirements in the specification shall not relieve the

contractor of the responsibility of assuring that all products or

supplies submitted to the Government for acceptance comply with

all requirements of the contract. Sampling in quality conformance

does not authorize submission of known defective material, either

indicated or actual, nor does it commit the Government to

acceptance of defective material.

4.2 Quality assurance terms and definitions. Quality

assurance terms and definitions as used in this specification are

in accordance with MIL-STD-109.

4.3 Classification of inspection. The inspection

requirements specified are classified as follows:

First article inspection (see 4.4).

Quality conformance inspection (see 4.5).

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business