 |
|||
|
|
|||
| ||||||||||
|
|  MIL-M-70778 (AR)
CODE OF FEDERAL REGULATIONS
Title 49 - Transportation, Parts 100-199
(Application for copies shoud be addressed to: Code of
Federal Regulations is available from the Superintendent of
Documents, U.S. Government Printing Office, Washinton, D.C.
20402. Orders should specify, "49 CFR 100-199 (latest
revisions)").
2.3 Order of precedence. In the event of a conflict between
the text of this specification and the references cited herein
(except for associated detail specifications, specification sheets
or MS standards) , the text of this specification shall take
Nothing in this specification, however, shall
precedence.
supersede applicable laws and regulations unless a specific
exemption has been obtained.
3.
REQUIREMENTS
3.1 Materials. Materials shall be in accordance with the
applicable drawings and specifications.
3.3 Acceptor lead assembly output. The acceptor lead
assembly shall produce a .005 inch minimum depresion in witness
plate when tested as per MIL-STD-331, Test 301.1.
Acceptor lead assembly functioning. The acceptor lead
3.4
assembly
shall function the transfer lead assembly in the slider
assembly
(dwg. 9366684) as evidenced by detonation of the lead cup
assembly
in the S&A assembly dwg. 9366668.
3.4.1 Acceptor lead assembly. Sensitivity when tested as
specified in MIL-STD-331, Test 301.1 (substitute lead for
detonator in Reading Test) using a polystyrene sleeve and an M100
detonation as lead initiator. The lead must initiate and function
high order.
3.5 Temperature conditioning and functioning of acceptor lead
assembly.
3.5.1 Hot temperature. The acceptor lead assembly shall
function the transfer lead assembly high order as specified in 3.4
after conditioning at 156 5F and while at a conditioned
temperature of 125 -- 5F.
+
3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals