 |
|||
|
Page Title:
Component/Equipment Intermediate Maintenance Manual. |
|
||
| ||||||||||
|
|  MIL-M-81260A(AS)
be described in detail with appropriate references to charts or curves. For
performance evaluation, a test schedule shall be presented in tabular form.
3.5.3.4.10.7
Test Requirements. - A table shall be included listing the
specific test requirements for components repaired within the scope of the
manual. The table shall be prepared with the following column headings:
Table (Number).
Test Requirements
Parts Replaced
Performance
Comments
Functional
or Repaired
Test
Test
3.5.3.4.11
Calibration. - Calibration procedures, as required, shall
be provided in accordance with MIL-M-38793.
3.5.3.4.12
Difference Data Sheets. - Difference data sheets shall be
prepared as specified in 3.5.4.4.
3.5.4
Component/Equipment Intermediate Maintenance Manual. -
When directed by the procuring activity, individual intermediate maintenance
manuals (separate coverage) shall be prepared for specified components or equip-
ment in lieu of coverage in system maintenance manuals outlined in 3.5.3.
These manuals shall provide instructions for authorized maintenance and repair
of components or equipment at the intermediate maintenance level in accordance
with the procuring activity maintainability plan.
3.5.4.1
Arrangement. - The general arrangement of component/
equipment manuals shall follow the requirements outline for system manuals
as specified in 3.5.2. The technical content shall be arranged as outlined in
3.5.3 through 3.5.3.4.12 and shall include (but not limited to) the following ad-
ditional items:
a.
Preservation requirements.
b.
Preparation for installation, use and shipment,
3.5.4.1.1
When difference data sheets are used (see 3.5.4. 4)., a
statement shall be included in the introduction indicating that certain sections
(identify by number) contain instructions for
(nomenclature and model,
type or part number). Instructions for additional models are (or "will be" which-
ever is applicable) provided in Section (identify by number) by the use of difference data
sheets. The additional models included in Section (identify by number) are
31
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals