 |
|||
|
Page Title:
Chapter 2 - Operating instructions. |
|
||
| ||||||||||
|
|  MIL-M-82376B
APPENDIX A
can tell us what you don't like about your equipment. Let us know
why you don't like the design or performance. Put it on an SF 368
(Product Quality Deficiency Report). We'll send you a reply."
c.
Description. The description paragraph shall briefly describe the
features, function, and purpose of the training device.
Illustrations shall be used to show general features, essential
operating times, major components, and accessories. Only
information pertaining to the operator/ instructor shall be
included. Information to be included as tabulated data shall not
appear here. Differences between models shall be briefly
described. Each system of the training device shall be described
separately, using the name of the system as a paragraph heading.
The description shall include the concept of each system, its
function, and how it affects and is affected by other systems. The
internal mechanics of the system shall be described only if the
operator/instructor cannot otherwise efficiently operate the
equipment. Paragraphs shall be included describing all capabilities
of the training device in relation to the operational equipment
being simulated or stimulated.
d.
Limitations. This paragraph shall describe the limitations of the
training device which prevents it from simulating all conditions of
the operational equipment. Nonfunctional portions of the training
device shall be presented in tabular form and described.
e.
Equipment data. A table which contains overall dimensions,
electrical characteristics, make, model, type, and any other
pertinent data shall be included.
30.2.3 Chapter 2 - Operating instructions. This chapter shall contain the
instructions needed by the operator to effectively and efficiently use the
training device. The following sections and paragraphs shall be included.
They shall be complemented with tables and illustrations.
30.2.3.1 Section I - Preparation for operation. Section I shall contain
the procedures for preparing the training device for operation. These
procedures shall include instructions for a preliminary inspection, warm-up,
and operational check.
30.2.3.1.1 Preliminary inspection. Preliminary inspection procedures
shall provide for a walkaround inspection of the training device to ensure
that major components are intact and ready for application of power.
Instructions shall be provided, as applicable, for the inspection of such
components as hoses, drive belts, electrical wiring, and indicators. Switches
and controls which require positioning before energizing the equipment shall
be described in a tabulation under the heading(s), "Name," Location," and
"Position or Setting."
80
0023E3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals