Click here to make tpub.com your Home Page

Page Title: Disposition of samples.
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 




img
MIL-M-85831 (AS)
conformance with specification requirements, and corrective action acceptable
to the qualifying activity has not been taken, action may be taken to remove
the failing product from the qualified products list Failure to submit the
report within 30 days after the end of each six month period may result in
loss of qualiftcation for the product.  In addltion to the periodic reports,
the contractor shall immediately inform the qualifying activity of inspection
data indicating failure of the qualified product to meet this specification.
In the event that no production occurred during the reporting period, a report
shall be submitted certifying that the company still has the capabilities and
facilities necessary to produce the item.  If during two consecutive reporting
periods, there has been no production, the manufacturer may be required at the
discretion of the quallfying activity, to submit the qualified products to
testing in accordance with qualification inspection requirement and the reason
for no production.
4.4 First article inspection.  First article Inspection shall be performed
in the order specified in Table II.
4.4.1 First article samples.  After award of the contract or order, the
manufacturer shall submit three complete masks.  The samples shall be
representative of the construction, workmanship and materials to be used
during production.
In addition, the manufacturer shall submit a certification
from the source verifying that the materials used in fabricating the couplings
were as specified herein prior to such fabrication.  In the the event of the
absence of certification from the source, a certificate of analysis or
certified inspection data shall be required as proof of conformance to
applicable requirements.  When a manufacturer is in continuous production of
these assembles from contract to contract, submission of further first
article samples on a new contract may be waived at the discretion of the
acquiring activity (see 6.2.1).  Approval of the first article samples or the
waiving of the first article inspection does not preclude the requirements of
submitting to the quality conformance inspection.  The first article
inspection samples shall be furnished to the Government as directed by the
contracting officer (see 6.2.1).
4.4.1.1 Disposition of samples.  Upon completion, of the first article
inspection, one approved coupling shall be returned to the manufacturer for
use in monitoring production.  The other samples shall be consumed or
destroyed In the first article inspection and shall not be considered as part
of the quantity to be delivered under contract.
4.5  Quality conformance Inspection.  Quality conformance inspection shall
consist of all the examinations and tests specified in Table III. The
sampling and inspection levels shall be as specified in MIL-STD-IO5.
4.5.1 Inspection lot.  An inspection lot size shall be expressed In units
of one mask made by one manufacturer under essentially the same conditions and
from the same materials and components.
4.5.1.1 Packaqing.  An inspection lot size shall be expressed in units of
one fully prepared shipping container, containing masks, fully prepared for
delivery, made from essentialy the same materials and components.  The sample
unit shall be one shipping container, containing masks, fully prepared for
delivery, with the exception that the shipping container need not be sealed.
13

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business