 |
|||
|
Page Title:
Table X. Width tolerances for strip |
|
||
| ||||||||||
|
|  MIL-N-46025B(MR)
1
Table X.
Width tolerances for strip
Thickness,
Width,
Tolerance, inch
inch
Inches
(plus and minus)
0.009 and under
All widths
0.005
Over 0.009 to 0.024,
incl.
All widths
.007
Over 0.024 to 0.075,
incl.
14 and under
.007
Over 0.075 to 0.100,
incl.
14 and under
.009
Over 0.100 to 0.125,
incl.
14 and under
.012
1
For strip with slit edges only.
3.5.3 Length. Strip may be ordered to cut lengths in which case a
variation of 0.125 inch over the specified length shall be permitted.
3.5.4 Straightness. The edgewise curvature (depth of arc) of strip
shall not exceed 0.05 inch multiplied by the length in feet. Straightness
for coiled strip shall be subject to agreement between the manufacturer and
contracting officer.
3.6 Workmanship. Material shall be commercially free from dirt, oxide,
scale, streaks, stains, grease, oil, lubricants, scratches, pit marks,
burns, chattermarks, dents, blisters, laps, grooves, slivers, seams,
cracks, inclusions and other injurious imperfections.
4.
QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for inspection. Unless otherwise specified in the
contract or purchase order, the supplier is responsible for the performance
of all inspection requirements as specified herein. Except as otherwise
specified in the contract or order, the supplier may use his own or any
other facilities suitable for the performance of the inspection
requirements specified herein, unless disapproved by the Government. The
Government reserves the right to perform any of the inspections set forth
in the specification where such inspections are deemed necessary to assure
supplies and services conform to prescribed requirements.
4.2 Lot. Unless otherwise specified in the contract or order, a lot
shall consist of material of the same temper, finish, melt, or thickness
made by the same manufacturing process, submitted for inspection at one
time.
7
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals