Methods of examination and test

Page Title: Methods of examination and test
Back | Up | Next

Web
www.tpub.com

Information Categories

....

MIL-N-63400(AR)

4.4.3 Testing. Testing is described in the First Article and

Quality Conformance Inspection forms.

4..4.4 Inspection equipment. The inspection equipment required

to perform the examinations and test prescribed herein is described

in the "Paragraph Reference/Inspection Method Column" of the First

Article and Quality Conformance forms. Test and measuring equipment

and inspection facilities of sufficient accuracy, quality and

quantity to permit performance of the required inspection shall be

established and maintained by contractor. The establishment and

maintenance of a calibration system to control the accuracy of the

measuring and test equipment shall be in accordance with

MIL-STD-45662. The contractor shall submit for approval inspection

equipment designs in accordance with the terms of the contract (see

6.3).

4.5 Methods of examination and test. The methods of

examination and test shall be in accordance with MIL-N-87144 for

resistor and capacitor elements inspection.

4.5.1 Visual and mechanical examination. Capacitor-Resistor

networks shall be examined to verify that the materials, design,

contsruction, physical dimensions, markings per MIL-STD-1285, and

workmanship are in accordance with the applicable requirements (See

3.2, 3.3, 3.3.2, 3.3.3, 3.5 and 3.8).

PACKAGING

5.1 Preservation - Packaging. The C-R networks shall be

packaged in accordance with the requirements specified for resistor

networks (those covered by MIL-R-83401) level B of MIL-R-39032.

5.2 Packing. The C-R networks shall be packed in accordance

with level B of MIL-R-39032.

5.3 Marking. The packed components shall be marked in

accordance with the commercial requirements of MIL-STD-1188.

5.4 Shipping. When C-R networks from more than one lot are

shipped together, each lot shall be kept separate, and the divisions

between lots clearly indicated to prevent mixing of lots in transit.

NOTES

6.1 Intended use. The networks covered by this specification

are intended for single-use} non-repairable military devices.

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business