 |
|||
|
|
|||
| ||||||||||
|
|  MIL-N-81497A(AS)
3.5.2.6.1 (Continued)
DAMP ON Lamp - This lamp shall indicate
(6)
that the equipment is utilizing the external
Doppler velocity data for damping in the
Inertial Mode. In parallel with the ex-
citation of this lamp shall be the damping
on relay (see 3.4.3.4.7). The lamp shall be
energized by a 4V DC control signal from the
Computer, Navigation.
STBY Lamp - This lamp shall indicate that
(7)
the Standby mode of operation is selected at
the Control, Navigation. The lamp shall be
energized by an 18V DC signal from the Control,
Navigation.
LRU Failure Lamps - The Control, Gyroscope Assembly
3.5.2.6.2
shall contain 5 LRU Failure lamps to visually inform the operator of
malfunctional LRU'S in the Self Test Submode.
GYRO ASSY Lamp - The Gyroscope Assembly fail lamp
(1)
shall indicate failure of this unit. The
lamp shall be energized by a 4V DC control
signal from the Computer, Navlgation.
CMPTR Lamp - The Computer, Navigation fail
(2)
lamp shall indicate failure of this unit
The lamp shall be energized by a 4V DC con-
trol signal from the Computer, Navigation.
CONT GYRO Lamp - The Control, Gyroscope
(3)
Assembly fail lamp shall indicate failure of
this unit. The lamp shall be energized by a
4V DC control signal from the Computer,
Navigation.
POWER SUPPLY Lamp - The Power Supply fail lamp
(4)
shall indicate the failure of this unit. The
lamp shall be energized by a 4V DC control
signal from the Computer, Navigation.
BTRY Lamp - The Battery fail lamp shall indicate
(5)
failure of this unit. The lamp shall be
energized by a 4V DC control signal from the
Computer, Navigation.
33
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals