 |
|||
|
|
|||
| ||||||||||
|
|  MIL-N-81604C(AS)
3.3.4 Control Panels - All rack or console mounted control
panels shall conform to the applicable requirements of MIL-C-6781.
The configuration of all panels must be approved by the procuring
activity prior to preproduction testing.
3.3.5 Interchangability - The equipment shall meet the inter-
changeability requirements of MIL-E-5400.
3.3.6 Interference Control - The generation of radio interfer-
ence by the equipment and the vulnerability of the equipment to
radio interference shall meet the requirements of MIL-STD-461,
MIL-STD-462, and MIL-STD-463. The electrical bonding require-
ments of MIL-B-5087 shall be implemented throughout the design
assembly and integration.
3.3.7 Provisions for Maintainability - Built-in test equipment,
construction and packaging, provisions for test points, and other
maintainability parameters shall be as specified in AR-10.
(Refer to 3.4.1 and 3.5.4.6.)
3.3.7.1 Maintainability Requirement. The maintainability
requirements for the AN/ANN-92(V) WRA's for the intermediate
level are as shown in table III and are based on a 95th percentile
The repair times in table III exclude test periods
projection.
required by VAST or other special test equipments.
3.3.7.2 Compatibility with VAST - The equipment, except the IMU,
shall be compatible with the Versatile Avionic Shop Test (VAST)
and shall meet the requirements of AR-8. When required by contract
VAST Test Programs shall be furnished in accordance with AR-9.
If VAST Test Programs exist for the equipment, and changes to the
equipment are made which will affect the fault diagnosis procedure,
changes to the existing Test Program shall be prepared as part of
the equipment changes in accordance with AR-9.
3.3.7.3 Compatibility with special IMU Test Equipment. - The
design of the IMU shall be compatible with test equipment designed
in accordance with xAS-1233 or equivalent, and the design shall
be subject to approval by the procuring activity.
3.3.8 Nomenclature, Nameplate and Identification Marking -
Nomenclature and serial number assignment, nameplate approval,
and identification marking shall be in accordance with MIL-N-18307.
9/10
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals