 |
|||
|
Page Title:
Surface treatment, construction and dimensions |
|
||
| ||||||||||
|
|  MIL-O-8115M(OS)
3.2 General Requirements
3.2.1 Data required. No data is required by this specification
(other than reports accompanying samples submitted for preproduction
and periodic production testing), or by applicable documents refer-
enced in Section 2, unless specified in the contract or order (see 6.2).
3,2.2 Preproduction sample. Unless otherwise specified in the con-
tract or order, preproduction samples of the oscillator subassembly shall
be manufactured using the methods and procedures proposed for the pro-
duction lot. These units shall be tested as specified in Section 4 herein
and are for the purpose of determining, prior to starting production, that
the contractor's production methods are capable of producing oscillator
subassemblies that comply with the technical requirements of the contractor.
See 4.3.1.
3.2.3 Materials. Unless otherwise specified in the contract, requisi-
tion, or order, all materials and purchased parts entering into the final
assembly of the oscillator shall conform strictly to the detailed require-
ments indicated on the applicable drawings, specifications, and publications
listed in NAVORD Dwg 1563736.
3.2.4 Surface treatment, construction and dimensions. Surface treatment,
construction and dimensions for the oscillator shall be in accordance with
the applicable drawings, specifications, and publications listed in NAVORD
Dwg 1563736.
3.2.5 Moisture, fungus, and corrosion. The oscillator shall be rendered
moisture, fungus, and corrosion resistant in accordance with detail require-
ments specified on the drawings and specifications listed in NAVORD Dwg
1563736,
3.2.6 Marking. Marking of assemblies. subassemblies, and parts shall be
in accordance with applicable drawings listed in NAVORD Dwg 1553736.
3.2.7 Threads. Unless otherwise specified: all threads shall be in
accordance with National Bureau of Standards Handbook H28. The class or
fit for threads shall be as specified on the applicable drawings.
3.2.8 Conflicting requirements. In the event of conflict between the
documents referenced herein and the contents of this specification, the
contents of this specification shall apply.
Interpret schematic diagram symbols in accordance with
3.3 Symbols.
USAS Y32.2.
3.4 Performance requirements and product characteristics, The os-
cillator subassembly shall meet the following performance requirements
and product characteristics.
3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals