 |
|||
|
Page Title:
Table III. Packaging and packing defects |
|
||
| ||||||||||
|
|  MIL-P-1407C
for defects in closure and strapping shall be in accordance with the appendix
of that specification.
Packaging and packing defects
TABLE III.-
Defect
Examination
Missing; incorrect; illegible; of improper size, location,
Markings (exterior
sequence, or method of application.
and interior
container)
Additional 50 plain pins omitted or not prepackaged as
Packaging
specified.
Door of carrier not closed securely with latch.
Corrugate fiberboard pads omitted or not sufficient amount.
Carrier not packaged in an intermediate container.
Number of packaged carriers more or less than specified.
Packing
Not consecutive series.
Packages do not fit snugly in container.
Improperly waterproofed.
PREPARATION FOR DELIVERY
5.
5.1 Packaging.-
Packaging shall be level A or C as specified (see 6.2).
5.1.1 Level A.-
5.1.1.1 Prepacking.- The numbered pins shall be inserted in their proper
trays l nd filled trays then placed in their respective carrier cases. Fifty
plain pins shall be closed and packaged in a minimum 60-pound kraft paper bag
fabricated from material conforming to grade E of UU-P-268, or a polyethylene
bag l nd placed in each carrier case. The film for polyethylene bag shall be
minimum 0.003 Inch thick conforming to type II, grade A, B, or C finish 1 or 2
of L-P-378. All scams of the polyethylene bag shall be effected by heat seal-
ing.
*
5.1.1.2 Packaging.- Corrugated fiberboard pads shall be inserted between
the trays and all interior surfaces of the carrier case to insure a tight pack.
The door of each carrier case shall then be secured with the latch provided.
Each carrier case shall then be packaged in a snug-fitting fiberboard box
conforming to type CF, variety SW, or type SF, class domestic of PPP-B-636.
Closure shall be in accordance with method II of the appendix of PPP-B-636.
10
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals