- Schedule of Piping, Valves, Fittings and
Associated Piping Components for Submarine
- Airborne and Structureborne Noise Measurements
and Acceptance Criteria of Shipboard Equipment.
- Schedule of Piping, Valves, Fittings, and
Associated Piping Components for Naval Surface
DOD-STD-2147 - Technical Repair Standards (TRS); Hull,
Mechanical and Electrical (HM&E), Preparation
- Boss, Gasket Seal Straight Thread Tube Fitting,
Standard Dimensions for.
plug for "O" Ring Gasket.
2.1.2 Other Government drawings and publications. The following other
Government drawings and publications form a part of this specification to the
extent specified herein. Unless otherwise specified, the issues shall be those
in effect on the date of the solicitation.
NAVAL SEA SYSTEMS COMMAND (NAVSEA)
Packings and Gaskets, Standard Application of.
- Root Connections for Attaching Piping.
810-1385850 - Piping, Installation, Pressure for All Services.
NAvAL SEA SYSTEMS COMMAND (NAVSEA)
0900-LP-001-7000 - Fabrication and Inspection of Brazed
0900-LP-003-8000 - Metals, Surface Inspection Acceptance
0941-LP-041-3010 - Submarine Safety Design Review Procedures
(Copies of specifications, standards, drawings, and publications required by
contractors in connection with specific acquisition functions should be obtained
from the contracting activity or as directed by the contracting activity. )
2.2 Other publications. The following documents form a part of this
specification to the extent specified herein. Unless otherwise specified, the
issues of the documents which are DoD adopted shall be those listed in the
issue of the DoDISS specified in the solicitation. Unless otherwise specified,
the issues of documents not listed in the DoDISS shall be the issue of the
nongovernment documents which is current on the date of the solicitation.