Test Code of Standards - Rotary Pump Section.
(Application for copies should be addressed to the Hydraulic Institute, 2130 Keith
Building, Cleveland, OH 44115.)
AMERICAN IRON AND STEEL INSTITUTE (AISI)
Steel Products Manual.
(Application for copies should be addressed to the American Iron and Steel Institute,
1000 16th Street, NW, Washington, DC 20036.)
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
B18.2.1 - Square and Hex Bolts and Screws, Including Askew Head Bolts, Hex
Cap Screws, and Lag Screws.
B18.2.2 - Square and Hex Nuts.
B18.6.3 - Slotted and Recessed Head Machine Screws and Machine Screw Nuts,
B46.1 - Surface Texture.
(Application for copies should be addressed to the American National Standards Institute,
1430 Broadway, New York, NY 10018.)
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
A27 - Mild- to Medium-Strength Carbon-Steel Castings for General Application.
A48 - Gray Iron Castings.
A193 - Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature
A194 - Carbon and Alloy Steel Nuts for Bolts for High-Pressure and High-Temp-
A216 - Carbon-Steel Castings Suitable for Fusion Welding for High-Temperature
A325 - High-Strength Bolts for Structural Steel Joints, Including Suitable
Nuts and Plain Hardened Washers.
A395 - Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated
A695 - Steel Bars, Carbon, Hoc-Rolled, Special Quality, for Fluid Power
B23 - White Metal Bearing Alloys (known commercially as "Babbitt Metal") .
B584 - Copper Alloy Sand Castings for General Applications.
(Application for copies should be addressed to the American Society for Testing and
Materials, 1916 Race Street, Philadelphia, PP 19103,)
(Technical society and technical association specifications and standards are generally
available for reference from libraries. They are also distributed among technical groups
and using Federal agencies) ,
3.1 Qualification, Pumps furnished under this specification shall be products which
are qualified for listing on the applicable qualified products list at time set for opening
of bids (see 4.3 and 6.3).
3.2 Pump characteristics. General range of pump characteristics shall be in accordance
with table I. Characteristics of pumps to be procured shall be as specified (see 6.2.1).