 |
|||
|
|
|||
| ||||||||||
|
| MIL-P-26367A
03.2 The headings and numbering of sections and paragraphs of the model speci-
fication as indicated herein shall correspond to those of MIL-P-26366. Those para-
graphs which need not be included in the model specification have been omitted from
the outline. Failure to reference in the contractor's model specification a particu-
lar requirement of MIL-P-26366 shall indicate the contractor's complete compliance
therewith. When departures from the requirements of this specification and of
MIL-P-26366 are necessary, the details of such departures shall be stated as specific
requirements bearing the same paragraph heading and numbering as in MIL-P-26366 with
additional subparagraph numbers and headings as indicated herein.
03.3 Parenthetical sentenses, phrases, and words are included herein for the
guidance of the propeller manufacturer in connection with the preparation of the
model specification. Parenthetical statements shall not be copied in the model speci-
fication.
03.4 The specification number shall be the number assigned by the propeller
system manufacturer. When revisions are made, they shall be designated by the use of
a dash and a letter following the number, with a revision date therefor, which shall
be shown on page 1 only. Only the specification number and the revision suffix letter,
if applicable, shall be shown on subsequent pages.
03.5 For purposes of permitting preliminary evaluation of a proposed propeller
system design, or for release of approved propeller performance characteristics in
connection with and airplane design competition: the propeller manufacturer may submit
a preliminary model specification. However, a complete approved model specification
will be required for a contract.
03.5.3 The preliminary model specification shall be prepared in accordance with
the requirements stipulated herein, except that, at the option of the manufcturer,
the information required in paragraph numbers preceded by as asterisk (*) may be
omitted.
04. MODEL SPECIFICATION
04.1 The format and instructions for the preparation of the model specification
follow.
2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals