 |
|||
|
|
|||
| ||||||||||
|
|  MIL-P-45694(Ord)
3.10 Identification marking - Unless otherwise specified,
Identification marking shall be in accordance with Standard
MIL-STD-130.
4. QUALITY ASSURANCE PROVISIONS
inspection.- Unless otherwise specified
4.1 Contractor's
herein, the supplier is responsible for the performance of all
Inspection requirements prior to submission for Government
inspection and acceptance. Except as otherwise specified, the
supplier may utilize his own facilities or any commercial
laboratory acceptable to the Government. Inspection records of the
examinations and tests shall be kept complete and available to
the Government as specified in the contract or order.
4.2 Production model.- Unless otherwise specified in the
contract, one Plotting Board: M17 shall be selected by the
Government Inspector as soon as practicable after the start of
production, and be inspected by the contractor under the surveillance
of the Government. This inspection shall be conducted at the
s
contractor facility P or Government approved laboratory, using
test equipment authorized for use on the contract. The model
shall be inspected for all requirements of this specification by
utilizing examination and testing methods prescribed herein,
4.2.1 Production model failure.- Should the production
model fall to pass the prescribed tests, the contractor shall cease
those operations which are causing the rejection and shall make
the necessary corrections. When correction in the process have
been made, a new production model shall be examined and tested by
the contractor under the surveillance of the Government. Acceptance
of production lots will not commence until an acceptable production
model is submitted and corrective actions have been taken to
eliminate deficiencies.
4.3 Lot formation.- Inspection lot sizes and
lot formation
shall be inaccordance with Standard MIL-STD-105.
4.3.1 Defective units and lots shall be processed as
specified in Standard MIZ-STD-105,
4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals