 |
|||
|
|
|||
| ||||||||||
|
|  MIL-P-46183
TABLE V.
Test methods.
Property
Test Method
Melting point
ASTM
D3418
Glass transition temperature
ASTM
D34l8
Specific gravity
ASTM
D792
Tensile strength
ASTM
D638
Elongation at break
ASTM
D638
Flexural modulus
ASTM
D790
Heat deflection temperature
ASTM
D648
Water absorption
ASTM
D570
Fiber content (types II and III only)
ASTM
D3l7l
Izod impact strength
ASTM
D256
Oxygen index
ASTM
D2863
Specific optical density
ASTM
F8l4
Volume resistivity
ASTM
D257
Dielectric strength
ASTM
D149
5.
PACKAGING
5.1 Preservation.
Preservation shall be level A or Industrial as specified
(see 6.2).
5.1.1 Level A. Unless otherwise specified, the material shall be packed in one
of the following types of containers:
a.
Fiber drums conforming to PPP-D-723, type II, grade A, or type III,
grade A in quantities of 90 kg (200 lbs) maximum.
b.
Metal drums conforming to PPP-D-729, type III or type IV, in quantities
of 181 kg (400 lbs), maximum.
Insofar as practical, drums shall be of uniform shape and size, with minimum
cube and tare consistent with the protection required. Drums shall contain
identical quantities and shall be closed in accordance with the applicable
container specification. Fiber drums shall be furnished with a 4 mil thick
polyethylene liner properly heat sealed.
5.1.2 Industrial.
The material shall be packed in accordance with
ASTM D395l.
5.2. Marking. In addition to any special marking required by the contract or
purchase order, shipping containers shall be marked in accordance with MIL-STD-
129, with the exception that industrial marking in accordance with ASTM D3951
applies for industrial packaging only.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals