 |
|||
|
|
|||
| ||||||||||
|
|  MIL-P-46530D(AR)
If two or more units of the sample have an average radial
void between the seated band and the band seat, greater
than 0.004 inch, the lot shall be rejected. If one unit
of the sample has an average radial void, greater than
0.004 inch, a second sample consisting of the same number
of units as specified for the first sample shall be
tested. If in the accumulated samples, two or more units
have an average radial void greater than 0.004 inch, the
lot shall be rejected.
Rejection of one or more units of the sample by the flaw
detector in the test for body metal soundness shall be
cause for rejection of the lot.
Failure of the flaw detector to reject PCS No. 1 shall be
cause for rejection of all projectile metal parts
inspected for "soundness" since the preceding test and
shall require requalification of the equipment for
automatic inspection.
Failure of the phosphate coating on the sample
projectiles or standard panels to comply with the
applicable requirements shall cause rejection of all
production projectile metal parts phosphate since the
preceding test.
If two or more units of the sample fail to comply with
the requirement for paint adhesion, the lot shall be
rejected.
If one unit of the sample fails to comply with
the requirement, a second sample consisting of the same
number of units as specified for the first sample shall
be tested. If in the accumulated samples, two or more
units fail to comply with the requirement for paint
adhesion, the lot shall be rejected.
If two or more units of the sample fail to comply with
the corrosion resistance requirement, the lot shall be
If one unit fails to comply with the
rejected.
requirement a second sample consisting of the same
number of units as specified for the first sample shall
be tested. If in the accumulated samples, two or more
units fail to comply with the corrosion resistance
requirement, the lot shall be rejected.
The lot shall be rejected, if any one of the following
types of metal parts separation or breakup occurs in the
metal parts security test, as witnessed by hole(s) in the
fragmentation screen(s), or recovery of the part(s) or
fragment(s):
18
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals