 |
|||
|
|
|||
| ||||||||||
|
|  MIL-P-46601B(MU)
3.6 Workmanship. -The requirements for workmanship are as specified on the
applicable drawings, referenced specifications, and standards, and the
following:
3.6.1 Process defects. -The primers and components shall be free of defects
such as cracks, splits, severe scratches, cuts, dents, perforations, missing
or unfinished components and other forms of substandard workmanship.
3.6.2 Cleanliness. -The primers and its components shall be free of all
foreign matter.
4. QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for inspection. -Unless otherwise specified in the
contract or purchase order, the supplier is responsible for the perform-
ance of all inspection requirements as specified herein. Except as
otherwise specified in the contract or order, the supplier may use his own
or any other facilities suitable for the performance of the inspection
requirements specified herein, unless disapproved by the Government. The
Government reserves the right to perform any of the inspections set forth
in the specification where such inspections are deemed necessary to assure
.
supplies and services conform to prescribed requirements.
4.1.1 Quality assurance terms and definitions .-Reference shall be made
to MIL-STD-109 for definition of quality assurance terms.
4.2 Classification of Inspections. -The inspection requirements specified
herein are classified as follows:
First article inspection (see 4.3).
1.
2.
Quality conformance inspection (see 4.4).
4.3 First article inspection.
4.3.1 First article sample.-The sample shall be delivered for inspection
in accordance with first article approval provisions of the contract and
MIL-A-2550, and shall consist of:
a. Inspection:
125 cups
125 anvils
b.
Firing tests:
2,000 primers
4.3.1.1 Inspection.-After inspection by the contractor and provisional
acceptance by the Government activity, the sample will be inspected in
accordance with the provisions of MIL-A-2550. Failure of the original
first article sample to be in accordance with the applicable drawings and
the requirements of Para. 3, as specified herein, will result in sample
disapproval.
(see 6.2)
3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals