 |
|||
|
|
|||
| ||||||||||
|
|  MIL-P-48606B(AR)
TABLE V.
Test equipment list.
(continued)
ITEM NUMBER
DESCRIPTION
4.
Oscilloscope
Dual channel, 25 MHz Bandwidth
Philips model PM3212 or equivalent
5.
Load Resistors
Various values and wattages as needed to
produce load currents per Tables I and II.
4.7
Methods of inspection.
4.7.1 Environmental. Environmental tests shall be conducted in
accordance with the test conditions, general test performance
guidance and individual test methods of MIL-STD-810, except as
specified herein. Test facilities, chambers and apparatus used in
conducting the tests contained in this specification shall be
capable of meeting the conditions required.
4.7.1.1 Vibration. The test shall be performed as specified in
Method 514, Category 8, Procedure I, of MIL-STD-810 as modified by
3.3.3 herein. In Step 1 of Procedure I, only steps 4 through 8 of
paragraph II-2.1 apply. The power supply assembly shall be attached
to the vibration generator directly or with a fixture, and securely
held by its normal means of attachment. After vibration, the power
supply assembly shall be tested as specified in 4.7.2 and 4.7.3
herein to determine compliance with 3.3.1.
4.7.1.2 Altitude (operating and non-operating). This test
shall be performed as specified in Procedures II and III, Method 500
The operational checkout shall be as specified in
4.7.2 and 4.7.3 for compliance with 3.3.2.
4.7.1.3 Temperature.
4.7.1.3.1 Hiqh (operating and non-operating). This test shall
be performed as specified in procedures I and II, Method 501 of
MIL-STD-810 with constant temperature extremes as specified in
3.3.3. The operational checkout shall be as specified in 4.7.2 and
4.7.3 for compliance with 3.3.3.
4.7.1.3.2 Low (operating and non-operating). This test shall
be performed as specified in Procedures I and II; Method 502 of
MIL-STD-810 with constant temperature extremes as specified in
3.3.3. The operational checkout shall be as specified in 4.7.2 and
4.7.3 for compliance with 3.3.3.
4.7.1.4 Humidity (non-operating). This test shall be performed
in accordance with Procedure III, Method 507 of MIL-STD-810 except
that in Step 7, Checkout shall be performed at the conclusion of the
test only, with the item at standard ambient conditions. The
operational checkout shall be as specified in 4.7.2 and 4.7.3 for
compliance with 3.3.4.
11
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals