PACKAGING DATA SHEET
Packaging of Plotting Board, Flash
Ranging, Fire Control: M18 W/Equipment.
(Copies of specifications, standards, drawings, and packaging data sheets
required by suppliers in connection with specific procurement functions
should be obtained from the procuring activity or as directed by the
3.1 Materials.- Materials shall be in accordance with drawings$
material specifications, and general specifications forming a part of
3.2 Fabrication.- The plotting board shall be manufactured in
accordance with Drawing F8567955 and the respective drawings pertaining
3.3 General specification.- The contractor shall be responsible
for adherence to, and compliance with, the followinng requirements of
Order of precedence
Dimensions and tolerances
Inorganic protective surface finishes
Part identification and marking
3.4.1 Storage temperatures.- The plotting boards shall show no
evidence of physical failure and shall meet all performance requirements
of O this specification at a standard ambient temperature of between 60° and
90 F. after having been exposed to and thermally stabilized at ambient
temperatures of -80° and +160°F.
3.4.2 Operating temperatures.- The plotting boards shall meet the
applicable requirements of 3.8 while exposed to and thermally stabilized
at ambient temperatures of -40° and +150 F.
3.5 Plotting scale flatness.- With the plotting board arranged for
two (2) man operation, the plotting scale of the drafting machine shall
lie flat on any part of the disk from the "7" graduation to the "15"
graduation within .015 inch when the "11" graduation is at the center of
the board. The ends of the scale shall lie flat within 0.025 inch.