first article approval and prior to Government acceptance or rejection
by item or lot.
(Conducted at a temperature between 60° to 90 F)
MAJOR: AQL 1.0% Defective
Plotting scale flatness
Plotting board table
Plotting disk surface
4.3.3 Acceptance and rejection.- Rejected lots shall be screened for
all defective characteristics- Removal or correction of defective units
and resubsmittance of rejected lots shall be in accordance with "Acceptance
and Rejection" as specified in MIL-STD-105.
4.4 Special sampling.
4.4.1 General.- One plotting board shall be selected at random from
each 100 produced, or from each month's production, whichever occurs first.
Control samples shall have successfully met all acceptance tests specified
herein prior to conducting the following examinations and tests:
Drawings and Specifi-
Visual and Drawings
Visual and MIL-F-
4.4.2 Temperature tests.- Three plotting boards shall be selected
at random from each 50 produced, or from each month's production, which-
ever occurs first, to determine compliance with the storage and operating
temperatures as specified in 3.4.1, 3.4.2, 4.6.1 and 4.6.2 respectively.
4.4.3 Failure of sample.- Should any item of a special sampling fail
to meet the specified test requirements, acceptance of the product will be
suspended by the Government until necessary corrections have been made by