 |
|||
|
|
|||
| ||||||||||
|
|  MIL-P-50603B(AR)
4.5.5 Defective weapon. If the test weapon fails to comply
with the cyclic rate established for the weapon or any test
cartridge firing defect is found to have been' caused by a
defective weapon, as determined by the Government, the test shall
be suspended. The weapon shall be corrected or replaced and the
test repeated in whole or in part as indicated. If the test
cartridge defect is not found to have been caused by a defective
weapon it shall be valid for first article quantity or lot penalty.
PACKAGING
5.
5.1 Preservation and packaqinq.
(See 5.2.1)
5.1.1 Level B.
5.2 Packing.
The primers shall be packed in accordance
5.2.1 Level B.
with Dwg. 9387196.
Marking shall be in accordance with Dwg.
5.3 Marking.
9387196.
5.4 Shipping. When primers from more than one lot are
shipped at one time each lot shall be kept separate and the
division between lots clearly indicated to prevent mixing of the
lots in transit.
NOTES
6.
6.1 Intended use. The primers covered by this specification
are intended for use in 20mm and 25mm cartridges.
Ordering data should include:
6.2 Orderinq data.
Title, number and date of this specification.
a.
b. Quantity required, delivery schedules, and cartridge
and weapon system that primers are being procured for.
C. Quality Conformance Inspection, if other than
specified in Section 4 of this specification.
d. First Article Sample requirements, if other than
specified in Section 4 of this specification.
e. Packaging requirements, if other that specified in
Section 5 of this specification.
20
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals