 |
|||
|
|
|||
| ||||||||||
|
|  MIL-P-5238C
3.8.2 Reliability. The reliability of the pump to perform shall be stated
in the detail specification, as required to satisfy system requirements.
3.8.3 Maintainability. The maintainability plan shall' provide an estimate
of maintenance manhours, total clock-hours, and special tools needed for
intermediate shop and overhaul maintenance of the-pump assembly.
3.9 Interchangeability. All component parts shall be interchangeable between
units without selection for fit or performance. Part numbering shall be governed
by the requirements specified in MIL-STD-1OO and the contract.
3.10 Nameplate. An aluminum or corrosion resistant steel (stamped or etched)
metal nameplate, conforming to MIL-P-15024 shall include the identification
requirements of MIL-STD-130 and the following:
PUMP, FUEL BOOSTER, AIRCRAFT
Specification MIL-P-5238C
Manufacturer's Part Number
Serial Number
The assembly date marking shall be in accordance with
3.11 AGE Control.
MIL-STD-1523.
3.12 Workmanship Workmanship shall be in accordance with all applicable
specifications, drawings, and quality control plans.
4.
QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for inspection. Unless otherwise specified in the contract
or purchase order, the supplier is responsible for the performance of all inspec-
tion requirements as specified herein. The supplier may use his own or other
suitable facilities unless disapproved by the Government. The Government reserves
the right to perform any of the inspections set forth in the specification where
such inspections are deemed necessary to assure supplies and services conform to
prescribed requirements.
The inspection and testing of the pump
4.2 Classification of inspections.
shall be classified as follows:
First Article Inspection
a.
Quality Conformance Inspection.
b.
4.3 First artlclc inspection. The first article inspection shall consist of
all inspections and tests herein. Any additional tests shall be in accordance
with the detail specification and the procurement document. The number of test
articles and the order of tests shall be in accordance with table I.
9
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals